Piper PA-28 Round Fuel Selector Decal, 5-inch for Flat Plate (Red & White)
$20.00
The Piper PA-28 flat-plate fuel selector decal is a 5-inch red-and-white rotary selector face marking Left/Right Tank at 25 gallons and the Off positions.
Piper PA-28 Flat-Plate Fuel Selector Decal
The Piper PA-28 Flat-Plate Fuel Selector Decal is the 5-inch red-and-white rotary selector-face decal made for a flat selector plate, marking the left and right 25-gallon tanks and the off positions.
What it marks
- LEFT TANK — 25 GALS
- RIGHT TANK — 25 GALS
- OFF positions (lower left and lower right)
- Central FUEL label
Compatibility
This Piper PA-28 Flat-Plate Fuel Selector Decal matches the red-and-white round PA-28 selector face at 25 gallons per tank in the 5-inch size for a flat plate, used in early PA-28s; the companion 4-inch beveled-plate version is sold separately.
This information is a guide. Your aircraft’s POH/AFM and the Piper parts manual are the final authority — confirm the correct placard, markings, and applicability for your model and serial number before ordering. If you’re unsure which version fits, please contact us.
Materials & installation
- Thermally printed on 3M Scotchcal 220 high-performance cast vinyl, rated for years of service (−40°F to 225°F).
- Sealed with a Lexan over-laminate for a tough, scratch- and abrasion-resistant cockpit finish that stays clear and legible.
- Pre-cut with a peel-and-stick pressure sensitive adhesive — clean the surface, peel the backing, and press it into place. No trimming required.
Frequently asked questions
Is the Piper PA-28 Flat-Plate Fuel Selector Decal a direct replacement?
The Piper PA-28 Flat-Plate Fuel Selector Decal reproduces the original markings, so it drops straight in as a clean, legible refresh. Always compare it to your existing decal and confirm the details against your POH/AFM before installing.
How do I know if my plate is beveled or flat?
Look at your selector face: a beveled plate has a dished, beveled edge; a flat plate is completely flat. If you’re not sure, send a photo through our contact page and we’ll confirm the size.
How is it installed?
It is pre-cut with a peel-and-stick pressure sensitive adhesive. Clean the surface, peel the backing, and press it into place — no trimming required.
Additional information
| Compatible Models | PA-28-151 Warrior, PA-28-161 Warrior II, PA-28-180 Cherokee, PA-28-181 Archer II/III |
|---|---|
| Meets requirements of Piper Part Number(s) | 581-685, 581-688, 581-890, 581-891, 99184-002, 99184-005, 99184-007, 99184-008, 99184-02, 99184-03, 99184-04, 99184-05, 99184-07, 99184-08 |
| POH/AFM | Placard content varies by model, year, and serial number. Your aircraft’s POH/AFM and the Piper parts manual are the final authority — confirm the correct placards, wording, and values for your model and serial before ordering. |
Reviews
Product reviews are on the way — we’re setting up reviews for individual placards.
In the meantime, see what Piper owners say about our placards and our service on our Testimonials page, and across the Piper owner forums and community groups where customers share their experience.