Piper Flap Step Warning Placard
$18.00
This Piper flap step warning placard meets the requirements of Piper part numbers 582-789 and 35664-02. Compatible with a wide range of Piper PA-28, PA-32, PA-34, and PA-44 models—including the PA-28-181 Archer, PA-28R-201 Arrow, PA-32-260 Cherokee Six, PA-32R-301 Saratoga, PA-34-220T Seneca, and PA-44-180 Seminole. See the full compatibility list below.
Overview
This Piper flap step warning placard replaces the common Piper flap step decal and installs near the wing flap step. Designed as a direct replacement across a wide range of PA-28 and PA-32 series aircraft, plus the PA-34 Seneca and PA-44 Seminole, it is one of our Piper exterior placards.
Compatibility
This placard meets the requirements of these Piper part numbers:
- 582-789
- 35664-02
Compatible aircraft models:
- PA-28-140 Cherokee Cruiser
- PA-28-140 Cherokee (160HP STC)
- PA-28-150 Cherokee
- PA-28-151 Warrior
- PA-28-160 Cherokee
- PA-28-161 Warrior
- PA-28-161 Warrior II
- PA-28-161 Cadet
- PA-28-180 Cherokee
- PA-28-181 Archer II/III
- PA-28-235 Pathfinder
- PA-28R-180 Arrow
- PA-28R-200 Arrow II
- PA-28R-201 Arrow III
- PA-28R-201T Turbo Arrow III
- PA-32-260 Cherokee Six
- PA-32-300 Cherokee Six
- PA-32R-300 Lance
- PA-32R-301 Saratoga
- PA-32R-301T Turbo Saratoga
- PA-34-220T Seneca III
- PA-34-220T Seneca IV
- PA-34-220T Seneca V
- PA-44-180 Seminole
Part numbers and applicable Piper models are provided as a helpful guide, but always confirm compatibility with your POH and/or parts manual for your specific model and serial number.
Materials & installation
- Thermally printed on 3M Scotchcal 220 high-performance cast vinyl for durable, professional-quality aircraft markings that stand up to weather, temperature extremes, and regular use—from −40°F to 225°F.
- Sealed with a Tedlar over-laminate for fuel- and UV-resistance and extreme durability—stands up to fuel, chemicals, abrasion, and sun exposure.
- Pre-cut and ready to apply—no trimming with a razor blade or scissors.
Frequently asked questions
What is a Piper flap step warning placard?
It warns against stepping on the wing flap. The flap is not a load-bearing surface, so the placard marks it as a no-step area to prevent damage to the flap and its operating mechanism during boarding or servicing.
Which Piper models are these placards compatible with?
It fits a wide range of Piper PA-28, PA-32, PA-34 Seneca, and PA-44 Seminole models—including the PA-28-181 Archer, PA-28R-201 Arrow III, PA-32-260 Cherokee Six, PA-32R-301 Saratoga, and PA-44-180 Seminole. See the full compatibility list above for all 24 models.
Is this a direct replacement for the original placard?
Yes. The placard meets the requirements of Piper part numbers 582-789 and 35664-02 and it installs as a straightforward replacement.
How is it installed?
The decal is pre-cut with peel-and-stick pressure sensitive adhesive and applies directly near the wing flap step—no trimming with a razor blade or scissors required.
How do I confirm this placard fits my aircraft?
Part numbers and applicable Piper models are based on our best information and experience, but you should always confirm compatibility with your POH and/or parts manual for your specific model and serial number. If anything doesn’t look right, please contact us so we can review and correct it.
Additional information
| Compatible Models | PA-28-140 Cherokee (160HP STC), PA-28-140 Cherokee Cruiser, PA-28-150 Cherokee, PA-28-151 Warrior, PA-28-160 Cherokee, PA-28-161 Cadet, PA-28-161 Warrior, PA-28-161 Warrior II, PA-28-180 Cherokee, PA-28-181 Archer II/III, PA-28-235 Pathfinder, PA-28R-180 Arrow, PA-28R-200 Arrow II, PA-28R-201 Arrow III, PA-28R-201T Turbo Arrow III, PA-32-260 Cherokee Six, PA-32-300 Cherokee Six, PA-32R-300 Lance, PA-32R-301 Saratoga, PA-32R-301T Turbo Saratoga, PA-34-220T Seneca III, PA-34-220T Seneca IV, PA-34-220T Seneca V, PA-44-180 Seminole |
|---|---|
| Meets requirements of Piper Part Number(s) | 35664-002, 35664-02, 582-789 |
| POH/AFM | Placard content varies by model, year, and serial number. Your aircraft’s POH/AFM and the Piper parts manual are the final authority — confirm the correct placards, wording, and values for your model and serial before ordering. |
Reviews
Product reviews are on the way — we’re setting up reviews for individual placards.
In the meantime, see what Piper owners say about our placards and our service on our Testimonials page, and across the Piper owner forums and community groups where customers share their experience.