Piper PA-32 Throttle Quadrant Overlay, C/S with Press-to-Release
$20.00
The Piper PA-32 Throttle Quadrant Overlay Press-to-Release version labels Throttle, Prop RPM, and Mixture, plus the mixture press-to-release strip — for PA-32 aircraft with the later release-lock quadrant: Cherokee Six 260/300, Lance, Lance II, and Saratoga.
Piper PA-32 Throttle Quadrant Overlay Press-to-Release
The Piper PA-32 Throttle Quadrant Overlay Press-to-Release is the PA-32 quadrant version for a constant-speed prop with the mixture press-to-release strip that Piper introduced in the mid-1970s. It fits the later PA-32 family — Cherokee Six 260/300, Lance, Lance II, and Saratoga.
Controls labeled
- THROTTLE — OPEN / CLOSE
- PROP RPM — INCR / DECR
- MIXTURE — RICH / LEAN
- Propeller-lock press-to-release strip
Compatibility
This Piper PA-32 Throttle Quadrant Overlay Press-to-Release fits the PA-32 throttle quadrant with the mixture press-to-release strip — the version Piper used from the mid-1970s on the Cherokee Six 260/300, Lance, Lance II, and Saratoga. Earlier PA-32 aircraft without the release mechanism use the Constant-Speed version instead. Confirm your quadrant layout before ordering.
This information is a guide. Your aircraft’s POH/AFM and the Piper parts manual are the final authority — confirm the correct placard, markings, and applicability for your model and serial number before ordering. If you’re unsure which version fits, please contact us.
Materials & installation
- Thermally printed on 3M Scotchcal 220 high-performance cast vinyl, rated for years of service (−40°F to 225°F).
- Sealed with a Lexan over-laminate for a tough, scratch- and abrasion-resistant cockpit finish that stays clear and legible.
- Pre-cut with a peel-and-stick pressure sensitive adhesive — clean the surface, peel the backing, and press it into place. No trimming required.
Frequently asked questions
Is the Piper PA-32 Throttle Quadrant Overlay Press-to-Release a direct replacement?
The Piper PA-32 Throttle Quadrant Overlay Press-to-Release reproduces the original markings so it drops straight in as a clean, legible refresh. Always compare it to your existing item and confirm the details against your POH/AFM before installing.
Which throttle quadrant overlay do I need?
Match it to your quadrant: the number of levers (two for fixed-pitch, three for a constant-speed prop), whether it has a propeller-lock press-to-release strip, and the body shape. If unsure, send a photo through our contact page.
How is it installed?
It is pre-cut with a peel-and-stick pressure sensitive adhesive. Clean the surface, peel the backing, and press it into place — no trimming required.
Additional information
| Compatible Models | PA-32-260 Cherokee Six, PA-32-300 Cherokee Six, PA-32-301 Saratoga, PA-32-301T Turbo Saratoga, PA-32R-300 Lance, PA-32R-301 Saratoga, PA-32R-301T Turbo Saratoga, PA-32RT-300 Lance II, PA-32RT-300T Turbo Lance II |
|---|---|
| Meets requirements of Piper Part Number(s) | 69341-00, 69345-00, 69669-044, 69669-44 |
| POH/AFM | Placard content varies by model, year, and serial number. Your aircraft’s POH/AFM and the Piper parts manual are the final authority — confirm the correct placards, wording, and values for your model and serial before ordering. |
Reviews
Product reviews are on the way — we’re setting up reviews for individual placards.
In the meantime, see what Piper owners say about our placards and our service on our Testimonials page, and across the Piper owner forums and community groups where customers share their experience.