Placards, decals, and overlays we offer for the Piper PA-28-151 Warrior. Browse everything below that’s sized and labeled for this aircraft — interior and exterior markings alike. Your POH/AFM and parts manual are the final authority; confirm fitment by model and serial number before ordering. Not sure which fits? Contact us.
The Piper Warrior I/II Placard Set MPH is a complete interior placard set for the Piper Warrior I and II — the cockpit and cabin placards the aircraft needs in one kit, with airspeeds in miles per hour.
Printed on 3M cast vinyl with a durable Lexan over-laminate.
The Piper Warrior I/II Placard Set is a complete interior placard set for the Piper Warrior I and II — every cockpit and cabin placard the aircraft needs (checklists, limitations, control and switch labels, door, climate, and compass card) in one kit, with airspeeds in knots.
Printed on 3M cast vinyl with a durable Lexan over-laminate. A separate MPH version is available.
This circuit breaker panel overlay installs over the top of your existing Piper breaker panel with a peel-and-stick adhesive backing — printed black & white and made to your exact specifications. You tell us the label for each breaker position, and we build the overlay to match your panel.
Available for standard 13- and 14-slot Piper breaker panels. Each overlay is finished with a Lexan over-laminate, making it virtually scratch- and abrasion-proof.
Build your layout online below — or download a printable 13-slot or 14-slot template.
Model-specific visor-mounted power setting chart decal for the Piper PA-28 Warrior with the O-320-E3D engine, using POH/AFM-based data for quick in-flight reference.
Fits Piper visor blade P/N 65866-04 (also 79784-02), plus Rosen and other aftermarket visors.
Crisp white text is printed on a clear background for cockpit readability. Product images may show gray or black backing for photo clarity, but the actual decal is clear.
Installation instructions are included. You can also view the installation instructions online before ordering.
These Piper universal exterior placards are a printed sheet of the common exterior markings found around the airframe — NO STEP, NO PUSH, FUEL DRAIN, GROUND HERE, access-panel labels, and tire-inflation and gear-strut markings — in clean black lettering on a white background.
Printed on durable exterior-grade vinyl with a fuel- and UV-resistant Tedlar over-laminate. Some markings carry specific values (tire pressures, strut extension) — confirm these against your aircraft’s POH/AFM before use.
The Piper PA-28 flat-plate fuel selector decal is a 5-inch red-and-white rotary selector face marking Left/Right Tank at 25 gallons and the Off positions.
The Piper PA-28 beveled-plate fuel selector decal is a 4-inch red-and-white rotary selector face marking Left/Right Tank at 25 gallons and the Off positions.
The Piper Throttle Quadrant Overlay Fixed Pitch version labels the two controls — Throttle (Open/Close) and Mixture (Rich/Lean).
The Piper PA-28 25 Gal fuel selector decal set marks the three positions — Left Tank, Fuel Off, and Right Tank — at 25 gallons per tank, in black and white to match the original.
The Piper PA-28 24 Gal fuel selector decal set marks the three positions — Left Tank, Fuel Off, and Right Tank — at 24 gallons per tank, in black and white to match the original.
This Piper 100LL fuel placard set is a two-piece exterior decal marking 100LL avgas and a 24 U.S. gallon usable capacity, printed to match the original Piper fuel filler cap markings. Thermally printed on durable 3M cast vinyl with a fuel- and UV-resistant Tedlar over-laminate.
This Piper 100LL fuel placard set is a two-piece exterior decal marking 100LL avgas and a 25 U.S. gallon usable capacity, printed to match the original Piper fuel filler cap markings. Thermally printed on durable 3M cast vinyl with a fuel- and UV-resistant Tedlar over-laminate.
No products in the cart.