-
$75.00
This circuit breaker panel overlay installs over the top of your existing Piper breaker panel with a peel-and-stick adhesive backing — printed black & white and made to your exact specifications. You tell us the label for each breaker position, and we build the overlay to match your panel.
Available for standard 13- and 14-slot Piper breaker panels. Each overlay is finished with a Lexan over-laminate, making it virtually scratch- and abrasion-proof.
Build your layout online below — or download a printable 13-slot or 14-slot template.
-
Use the button below to request pricing and lead time for your custom aircraft placards and labels.
Request a Quote
-
$18.00
This Piper flap step warning placard meets the requirements of Piper part numbers 582-789 and 35664-02. Compatible with a wide range of Piper PA-28, PA-32, PA-34, and PA-44 models—including the PA-28-181 Archer, PA-28R-201 Arrow, PA-32-260 Cherokee Six, PA-32R-301 Saratoga, PA-34-220T Seneca, and PA-44-180 Seminole. See the full compatibility list below.
-
Only need one or two placards from a kit — not the whole set? Order the individual placards you need. Contact us with your Piper model and which placards you’d like, and we’ll send a quote and a link to check out.
Contact Us
-
$18.00
The Piper PA-28 24 Gal fuel selector decal set marks the three positions — Left Tank, Fuel Off, and Right Tank — at 24 gallons per tank, in black and white to match the original.
-
$18.00
The Piper PA-28 25 Gal fuel selector decal set marks the three positions — Left Tank, Fuel Off, and Right Tank — at 25 gallons per tank, in black and white to match the original.
-
$20.00
The Piper PA-28 beveled-plate fuel selector decal is a 4-inch red-and-white rotary selector face marking Left/Right Tank at 25 gallons and the Off positions.
-
$20.00
The Piper PA-28 flat-plate fuel selector decal is a 5-inch red-and-white rotary selector face marking Left/Right Tank at 25 gallons and the Off positions.
-
$45.00
Model-specific visor-mounted power setting chart decal for the Piper PA-28 Warrior II with the O-320-D3G engine, using POH/AFM-based data for quick in-flight reference.
Fits Piper visor blade P/N 65866-04, plus Rosen and other aftermarket visors.
Crisp white text is printed on a clear background for cockpit readability. Product images may show gray or black backing for photo clarity, but the actual decal is clear.
Installation instructions are included. You can also view the installation instructions online before ordering.
-
$20.00
The Piper Throttle Quadrant Overlay Fixed Pitch version labels the two controls — Throttle (Open/Close) and Mixture (Rich/Lean).
-
$26.00
These Piper universal exterior placards are a printed sheet of the common exterior markings found around the airframe — NO STEP, NO PUSH, FUEL DRAIN, GROUND HERE, access-panel labels, and tire-inflation and gear-strut markings — in clean black lettering on a white background.
Printed on durable exterior-grade vinyl with a fuel- and UV-resistant Tedlar over-laminate. Some markings carry specific values (tire pressures, strut extension) — confirm these against your aircraft’s POH/AFM before use.
-
$95.00
The Piper Warrior I/II Placard Set is a complete interior placard set for the Piper Warrior I and II — every cockpit and cabin placard the aircraft needs (checklists, limitations, control and switch labels, door, climate, and compass card) in one kit, with airspeeds in knots.
Printed on 3M cast vinyl with a durable Lexan over-laminate. A separate MPH version is available.
